gefran 1650 - FREQZ - Defining Power Line Frequency; S.PROG - Enabling Simplified Programming Mode; EDI - Enabling Editor CONFIGURATOR MENU; WEB.EN - Enabling Webserver Mode

80209C_MHW_850-1650-1850_02-2020_ENG_pag. 150
4.21.10. FREQZ - Defining power line frequency
Acronym Scrolling message Submenu Attributes
FREQZ LINE FREQUENCY EN.FUN R W
The parameter shows and sets the power line frequency.
Unit of measurement: Hz
Options: 50
60
4.21.11. S.PROG - Enabling Simplified Programming mode
Acronym Scrolling message Submenu Attributes
S.PROG SIMPLIFIED PROGRAMMER MODE EN.FUN R W
This parameter shows and sets enabling of Simplified Programming mode.
Unit of measurement: -
Options: OFF = Simplified Programming Mode disabled
On = Simplified Programming Mode enabled
4.21.12. EN.EDI - Enabling Editor CONFIGURATOR MENU
Acronym Scrolling message Submenu Attributes
EN.EDI ENABLE EDITOR CONFIGURATOR EN.FUN R W
This parameter shows and sets enabling in the set-up of the editor on the tools menu.
Unit of measurement: -
Options: OFF = MENU Configurator disabled
On = MENU Configurator Semplificato enabled
4.21.13. WEB.EN - Enabling webserver mode
Acronym Scrolling message Submenu Attributes
WEB.E WEBSERVER ENABLE EN.FUN R W
This parameter shows and sets enabling of webserver mode.
Unit of measurement: -
Options: OFF = Webserver mode disabled
On = Webserver mode enabled
4.21.14. CAL.EN - Enabling calendar mode
Acronym Scrolling message Submenu Attributes
CAL.EN CALENDAR ENABLE EN.FUN R W
This parameter shows and sets enabling of calendar mode.
Unit of measurement: -
Options: OFF = Calendar mode disabled
On = Calendar mode enabled