gefran 1650 - I.AUX2 - Auxiliary Input 2 Available; OUT.AN - Analog Output Available; Ctx - Current Transformer Input Available; X.in.dg - Digital Input Available

80209C_MHW_850-1650-1850_02-2020_ENG_pag. 61
4.4.14. I.AUX2 - Auxiliary input 2 available
Acronym Scrolling message Submenu Attributes
I.AUX AUXILIARY INPUT 2 AVAILABLE INFO R
If present, the parameter indicates that an auxiliary input 2 is installed on the controller.
Unit of measurement: -
Options: -
4.4.15. OUT.AN - Analog output available
Acronym Scrolling message Submenu Attributes
OUT.AN ANALOG OUTPUT AVAILABLE INFO R
If present, the parameter indicates that one or two analog outputs, configurable in voltage or current, are installed on the
controller.
Unit of measurement: -
Options: OUT.A1 = The device has 1 analog output
O.A1+2 = The device has 2 analog outputs
4.4.16. CTx - Current transformer input available
Acronym Scrolling message Submenu Attributes
CTx CURRENT TRASFORMER AVAILABLE INFO R
If present, the parameter indicates that one or more current transformer inputs are installed on the controller.
Unit of measurement: -
Options: CT1+2 = The device has 2 current transformer inputs
4.4.17. x.IN.DG - Digital input available
Acronym Scrolling message Submenu Attributes
x.IN.DG DIGITAL INPUT AVAILABLE INFO R
If present, the parameter indicates how many digital inputs are installed on the controller.
Unit of measurement: -
Options: 3.IN.DG = 3 digital inputs installed on the controller.
5.IN.DG = 5 digital inputs installed on the controller.
4.4.18. RS485 - RS485 serial port available
Acronym Scrolling message Submenu Attributes
RS485 FIELDBUS AVAILABLE INFO R
If present, the parameter indicates that an RS485 is installed on the controller.
Unit of measurement: -
Options: -