gefran 1650 - MAC.E - Controller Ethernet Address; IO.AUX - Auxiliary Digital IOs Available; IO.RELE - Auxiliary Relays Available; PS.MAI - Sensor Power Supply Available for Main Input

80209C_MHW_850-1650-1850_02-2020_ENG_pag. 62
4.4.19. MAC.E – Controller Ethernet Address
Acronym Scrolling message Submenu Attributes
MAC.E - INFO R
If present, this parameter indicates that the controller has an Ethernet communication module. The parameter shows the
physical MAC address of the Ethernet in the scrolling message.
The information is shown in the format xx-xx-xx-xx-xx-xx.
Unit of measurement: -
Options: -
4.4.20. IO.AUX – Auxiliary digital I/Os available
Acronym Scrolling message Submenu Attributes
8.I/O 8.I/O EXPANSION AVAILABLE INFO R
If present, the parameter indicates that the 8 digital input/output expansion board is installed on the controller (model
1850 only).
Unit of measurement: -
Options: -
4.4.21. IO.RELE – Auxiliary relays available
Acronym Scrolling message Submenu Attributes
8.RELY 8 RELAY EXPANSION AVAILABLE INFO R
If present, the parameter indicates that the 8 relay expansion board is installed on the controller (model 1850 only).
Unit of measurement: -
Options: -
4.4.22. PS.MAI – Sensor power supply available for main input
Acronym Scrolling message Submenu Attributes
PS.MAI MAIN SENSOR POWER SUPPLY AVAILABLE INFO R
If present, the parameter indicates that the controller has a transmitter power supply on the main input (model 850 only).
Unit of measurement: -
Options: VT1 = Power supply for 24V transmitter.
4.4.23. PS.AUX – Sensor power supply available for auxiliary input
Acronym Scrolling message Submenu Attributes
PS.AUX AUX SENSOR POWER SUPPLY AVAILABLE INFO R
If present, the parameter indicates that the controller has a transmitter power supply or potentiometer power supply on
the auxiliary input.
Unit of measurement: -
Options: VT2 = Power supply for 24V transmitter.
VP1 = 1V potentiometer power supply.