80209C_MHW_850-1650-1850_02-2020_ENG_pag. 70
4.5.10. STAT – Master communication status
Acronym Scrolling message Submenu Attributes
StAt MASTER STATUS MASTER R
This parameter shows the status of the Master Modbus communication function.
Unit of measurement: -
Options: RUN = Communication active
M.ERR = Communication error (at least one invalid response message)
TIM.OU = Communication timeout (at least one response message not received)
DISAB = Communication disabled
4.5.11. MAS.xx – Master communication value xx (*)
Acronym Scrolling message Submenu Attributes
MAS.xx (1) MASTER (2)
The parameter shows and sets (if R/W) the remote value.
The parameter is visible only if configured via GF_eXpress.
Unit of measurement: -
Options: (3)
(1) Descizione definita tramite GF_eXpress
(2) Tipo dato definito tramite GF_eXpress
(3) Intervallo di impostazione definito tramite GF_eXpress
(*) xx = da 01 a 20
4.5.12. ERR.xx – Master communication error xx (*)
Acronym Scrolling message Submenu Attributes
ERR.xx MASTER ERROR MASTER R
The parameter shows the status of the remote parameter in the event of malfunctioning.
The parameter is visible only if configured via GF_eXpress.
Unit of measurement: -
Options: m.ERR = Error response message
tim.O = Timeout response message
(*) xx = da 01 a 20
To Next Page
Loading...
Need help?
General
