26 ADL300 • Functions description and parameters list
3 Brake open Open Brake on Sequence lift diagram (*)
4 Smooth start Refer to diagram on parameter 11084
5 Multispeed “Mlt spd s0/s1/s2” on Sequence lift diagram (*)
6 Waiting 0 spd “Wait 0 ref” on Sequence lift diagram (*)
7 Zero speed “Spd 0 ref” on Sequence lift diagram (*)
8 Brake close "Close Brake" on Sequence lift diagram (*)
9 Cont open “Open contact” on Sequence lift diagram (*)
10 Not drive ok
(*) the diagram is at the top of menu 5.3
To Next Page
Loading...
Need help?
General