Gema MagicControl 4.0 - A Summary of the Directives and Standards

Rev. 01 12/21
12
•
Product description MagicControl 4.0 (CM40)
A summary of the directives and standards
This product was built according to the current state of the art. The
product is subject to the European directives and complies with the
following standards.
The product is suitable for the intended purpose and can be used in the
appropriate areas.
For further information, also refer to the enclosed Declaration of
Conformity.
European directives RL
EG-RL
2006/42/EU
Machinery
EG-RL
2014/34/EU
Equipment and Protective Systems in Potentially
Explosive Atmospheres (ATEX)
EG-RL
2014/30/EU
Electromagnetic compatibility
EN European standards
EN 50177
Stationary electrostatic application equipment for
ignitable liquid coating material - Safety
requirements
EN 50050-2
Electrostatic equipment for areas where there is
danger of explosion – electrostatic hand-held
equipment
Part 2: Electrostatic hand-held spraying
equipment
IEC/EN 60950
Safety of information technology equipment
UL 61010-2-201
Industrial controls, section "Requirements for the
place of installation"
DIN EN 60529
Degrees of protection provided by enclosures (IP
Code)
NEMA 250-2003
Enclosures for electrical equipment (1000 Volts
maximum)
DIN EN 60898-
1:2006-03
Electrical accessories - Circuit-breakers for
overcurrent protection for household and similar
installations
EN 50178
Electronic equipment for use in power
installations
IEC/EN 61131-2
Programmable controllers, Equipment
requirements and tests
EN 16985
Spray booths for organic coating material - Safety
requirements
Recognized safety-related regulations
764 / DGUV
Information
209-052
Electrostatic coating
Trade Union information concerning health and
safety during work (BGI)