Gema MagicControl 4.0 - Application Pump, Filter; Application Pump, Pinch Valve Diagnostic

Rev. 01 12/21
MagicControl 4.0 (CM40) System diagnosis
•
69
Basic setting = 1000 hours
Application pump, filter
By tapping the corresponding key or by changing pages (►) you
can access the status overview of the filters.
Fig.
73
:
Service life of the filter elements of the application pumps
Basic setting = 1500 hours
Application pump, pinch valve diagnostic
By tapping the corresponding key or by changing pages (►) you
can access the status overview of the “Pinch valve diagnostic”.
Fig.
74
:
Interval
An interval between 2 pinch valve diagnoses of 16.00 hours is entered by
Gema as a basic value. The pinch valve diagnostic of the application
pumps takes place automatically after the powder hose rinsing. When the
time has expired without a color change, the following message appears:
“Pinch valve diagnostic required”
The interval can be adjusted by the customer in user level 2 (user1) to
suit requirements.
Reset
Automatically executed after pinch valve diagnostic.
Last reset
The date is automatically updated.