Gema MagicControl 4.0 - Statistics; System Diagnosis

Rev. 01 12/21
MagicControl 4.0 (CM40) Product description
•
23
User
Admin
Gema
Service
user 1
user 2
user 3
User level
0
1
2
3
4
If no user is logged on to the panel,
operation is locked
–
–
–
–
–
Statistics
This chapter describes all available statistics functions.
– Please note that your plant control may not be equipped with all
the described functions.
– Optional equipment is marked by double asterisks**.
– For additional optional equipment, please contact your Gema
sales representative.
With its integrated statistics, trend tools and monitoring of wear parts, the
plant control offers the user the possibility to analyze important production
information to support system optimizations.
System diagnosis
The system diagnosis provides the user with an overview of the remaining
service life of the components, which enables the user to better plan for
maintenance intervals and spare parts. This ensures optimum
maintenance results by providing wear indicators for the most important
application components.
– Display and reset of wear parts status
– Maintenance intervals
– Service life = standard values set at the factory can be adjusted by
the customer
Fig.
7
: