Gema MagicControl 4.0 - Gun Nozzle; Powder Hose; Injector

Rev. 01 12/21
MagicControl 4.0 (CM40) System diagnosis
•
67
Gun nozzle
By tapping the corresponding key or by changing pages (►) you
can access the status overview of the gun nozzles.
Fig.
68
:
Service life of the gun nozzle per gun
Basic setting = 600 hours
Powder hose
By tapping the corresponding key or by changing pages (►) you
can access the status overview of the powder hoses.
Fig.
69
:
Service life of the powder hose per gun
Basic setting = 1500 hours
Injector
By tapping the corresponding key or by changing pages (►) you
can access the status overview of the injectors.