Gema MagicControl 4.0 User Manual

Rev. 01 12/21
66
•
System diagnosis MagicControl 4.0 (CM40)
Displayed values
Service life
An estimated service life of each part is set by Gema (basic setting). The
service life can be adjusted by the customer in user level 2 (user1) to suit
requirements.
Actual value
As soon as the guns are switched on, the actual value counter starts
counting up.
10% before the set service life, the color of the actual value and the
symbol on the main page changes to orange.
When the set time has expired, the color of the actual value and the
symbol on the main page changes to red. A message appears on the
main screen at the same time. The wear part should now be replaced.
Reset
As soon as the wear part is replaced, the actual value should be reset by
pressing the reset key.
Last reset
When the reset key is pressed, the current date is entered under “Last
reset”.
Electrode holder
By tapping the corresponding key or by changing pages (►) you
can access the status overview of the electrode holders.
Fig.
67
:
Service life of the electrode holder per gun
Basic setting = 800 hours

Gema MagicControl 4.0 Specifications

General

Brand	Gema
Model	MagicControl 4.0
Category	Control Unit
Language	English