Gema MagicControl 4.0 - Machine Data & Batch Management; Machine Data Description

Rev. 01 12/21
MagicControl 4.0 (CM40) Machine data
•
71
Machine data
MagicControl CM40
Description
The machine data are totalizers of individual machine components and
are used to evaluate plant utilization.
This includes the total operating hours in the individual operating modes,
conveyor movements, coating surfaces as well as gun and axis hours.
Fig.
76
: Machine data main screen
Pressing the arrow key will take you to the overview of the
operating hours of the guns and axes.
Automatic
Time during which the CM40 is in automatic
mode
Manual
Time during which the CM40 is in manual
mode
Cleaning
Time during which the CM40 is in cleaning
mode
Switch-off
Time during which the CM40 is in standby
mode