- 41 -
Fuel pipeline inspection I I I I I Ordinary tools
Lighting/metering/electric
devices
I I I I I I Visual multimeter
Main stand bracket I I I Ordinary tools
Absorber I I I I Ordinary tools
*
Torque force of engine
bolt
I I I I I Torque spanner
Anticipated inspection
1 Ignition system—obviously continuous ignition abnormality, engine fire or overheating, which requires
inspection and maintenance.
2 Carbon fouling elimination—obviously insufficient horsepower, which requires carbon fouling removal
from cylinder cover, piston head and exhaust system.
3 Piston & cylinder—excessive abrasion; replace cylinder if it is blocked.
Please have your motorcycle inspected and adjusted periodically at Generic distributors for being in best
condition.
The above table is established under the presupposition of 1000 km/month.
I—Inspection A—Adjustment R—Replacement C—Cleaning L—Lubrication
Note: 1. “*” Regulations on exhaust emission made by the State Environmental Protection Agency shall be
complied with. Maintenance must be carried out in accordance with the instruction manual supplied by the
company. We are not responsible for any loss rising from private adjustment or maintenance.
2. Increase frequency of washing air filter if your motorcycle runs on the sandy/gravel road or under heavily
polluted environment so as to extend its service life.
3. Motorcycles which often run at high speed or with high mileage shall be maintained frequently.
To Next Page
Loading...
Need help?
General
