EasyManua.ls Logo

Generic Onyx 50 - Idle Speed Adjustment

Generic Onyx 50
173 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 46 -
negative pole together.
Warning:
• Battery should be far away from fire source
•Turn off the charger switches when starting or completing charging in order to prevent spark of the connections
resulting in explosion.
You must follow the required current time when charging.
*Note
• Except emergencies, you should not use emergency charge.
• Measure the voltage for every other 30 minutes.
Charging currentstandard0.4A
Rapid4.0A
Charging timestandard10-15 hours
Rapid30 minutes
Charging completeclosed circuit voltageAbove 12.8V
Do not disconnect the battery during the adjustment of motorcycle, otherwise inner component of the motorcycle
may be damaged.
Carburetor
Idle speed adjustment
*Note
Idle adjustment was made in the implementation of the
engine warm-up state.
and refer to adjusting bolts.
Implement after warm-up of the engine.
Connect the engine rotation meter after running the engine.
Adjust the screw of the cable accelerator to rotating velocity.
Idle speed1900±100rpm/min
Adjust the idling adjusting screw when idle speed
is unstable or unsmooth after oiling lightly.

Table of Contents

Related product manuals