Generic Onyx 50 User Manual

- 62 -
Remove the alternator stator.
飞轮拔取器：flywheel remover
1.7.2 Installation
Install the stator on the body of the engine.
Connect the magnetor terminator.
Clean up the taper part of the bent axle and flywheel.
Install the solid key of the flywheel into the bent axle.
Aim the flywheel groove at the solid key on the axle.
* Note
Ensure the inside of the flywheel do not
have bolts.
Fix the flywheel with the universal spanner and tighten the
fixing screw.
Torque force value：9.0 N·m
Install the right body fender
飞轮：flywheel 冷却风扇：cooling fan 风扇盖：fan cover

Generic Onyx 50 Specifications

General

Brand	Generic
Model	Onyx 50
Category	Scooter
Language	English