Gesipa 8000 - Menu Structure

8.3 Menu Structure
Operation
8.3 Menu Structure
The following list shows the path to the various menus. They are selected with the function but-
tons or the rotary knob. From each menu it is possible to go back to the previous menu with
Back .
8
Title bar (information on menu)
Navigation field (function button)
Selection field (rotary knob)
- 20 -
AUTO
MAN
MAN
Menu
Cal
DS3
Vibration Feed Unit
Pressure Sensors
Large Pressure Booster
Small Pressure Booster
Separator
Blow Air
Mandrel Evacuation
Cycle
Additional Functions
PLC Activation
Continuous Test
I/O Test
PLC Interface Test
GAV Settings Menu
Process Monitoring Settings
Cal
Profile
Process Monitoring Calibration Menu
Force
Displacement
Force Calibration
Displacement Calibration
Profile Settings
List
Profile List Settings
PLC
PLC Profile List Settings
Test
PLC Interface Test
Process Data 20 Days
Day
Process Data Day
Process Monitoring
Process Data
Process Counter
Operating Data Acquisition
Maintenance
Access Codes
Time and Language
System Information
GRivCheck
GESIPA
Process Counter
Operating Data Acquisition
Maintenance
Access Codes
Time and Language
System Information
PC Mode
GESIPA
Menu
GAV Settings
Vibration Feed Unit Settings
DS1/DS2 Pressure Sensor Settings
DS1/DS2 Pressure Sensor Calibration
DS3 Pressure Sensor Calibration
WS2
WS1 Large Pressure Booster Settings
WS1 Large Pressure Booster Calibration
WS2 Large Pressure Booster Settings
Cal
WS2 Large Pressure Booster Calibration
Cal
WS3 Small Pressure Booster Settings
WS3 Small Pressure Booster Calibration
Separator Settings
Blow Air Settings
Mandrel Evacuation Settings
Cycle Settings
Additional Functions Settings
PLC Activation Settings
Continuous Test
I/O Test
PLC Interface Test
Cal
Filter
Status
Process Monitoring Filter
Process Monitoring Status
Cal
Process Monitoring Calibration
Not included in GAV-8000 eco