GRAPHTEC CE7000-60 - Page 195

CE7000-UM-251-9370 8-52
8 Electrical Adjustment
(8) Press the down position key until the following menu is displayed.
(9) Press the F2 key to display the following menu.
(10) Setadjustmentpenforceto10forthebertippens.
Press the POSITION ( ) key to increase or decrease the value to set.
(11) Press the ENTER key to display the following menu.
(12) Press the UP or Down position key until the following menu is displayed.
(13) Press the F2 key to display the following menu.
(14) Press the F2 key to display, the following menu is displayed.
Use the Position keys to move the pen to an open area to plot the adjustment pattern.