6-16
Chapter 6 Maintenance
6.12 Cleaning Media Stocker & Media Stocker Flange
When the inside of the media stocker flange or the laminate stocker flange become dirty, there is the possibility of the
media material or the laminate material becoming dirty. Also, since it can be the cause of bowing, periodically clean the
inside of the flange
Cleaning
(1) Remove the flange.
(2) Lightly wipe the inside of the flange section (which contacts the material surface) with cleaning paper.
$MFBOUIFJOUFSJPS
$MFBOUIFJOUFSJPS
(3) After cleaning, return it to its original position.
To Next Page
Loading...