2-28
Chapter 2 Preparation for Printing
Setting the Ink Ribbon
• When treating the ink ribbon, be careful not to let dust attach to the ribbon front and posterior. The
significant presence of dust can lead to a thermal head malfunction.
• When setting the ink ribbon, take full care not to get your fingers caught.
(1) Pull up the lever (below diagram) which secures the ribbon stocker, and pull out the media assistance.
Remove the set media assistance.
4UFQ
4UFQ
-FWFS
1JO
.FEJBBTTJTUBODF
(2) Set the ribbon stocker.
Makes sure the screw pin fits firmly in the slot.
5IFQJOTNVTUCF
QSPQFSMZGJUUFE
3JCCPOTUPDLFS
To Next Page
Loading...