3-4
Chapter 3 Printer Driver
Installing
Before installing the printer driver, make sure to NOT connect the interface cable between this
device (LCX603) and your computer.
(1) Make sure the power is switched off (
) in this device, and then connect the AC power cord for this device.
• Make sure that the printer is grounded.
• If the printer is not grounded, the operator could suffer an electrical shock in case of current leakage.
→
(2) When "LCX603 Setup" in the start screen is clicked, the setup screen will appear.
Follow the instructions shown on the screen.
(3) Makes sure the LCX603 is not connected, and then click "Next".
(4) Click "Next".
To Next Page
Loading...
