3-9
Chapter 3 Printer Driver
Select each of the following tabs and make settings.
• Paper tab: make settings with regard to paper size, area, print orientation, display units, etc.
• Graphics tab: make settings with regard to the color setting for each print head, cutlines, etc.
• Options tab: perform settings for resolution, transfer data type, and designing.
Click on [Print], and open the window.
[Paper] Tab
When you click on the [Paper] tab, the following screen appears.
Paper Size ......................Specifies the driver paper size used to determine the actual paper when creating the label
data.
There are eight available paper sizes: "LCX603 MAX", "Free Size", "User Size 1 - 5", and
"Specify within application".
Size "LCX603 MAX" is 100 mm x 200 mm.
"Free Size" can be set within the "LCX603 MAX" settings.
Please set the plotting area above 40 mm*.
The name of the user-defined size can be changed and the settings can be recorded.
Plotting Area ..................Selecting "Free Size" allows specifying an effective plotting area of the desired dimensions.
Orientation .....................The printing direction can be set to either "Portrait" or "Landscape".
Mirror .............................Prints the label as a mirror image.
Unit ................................The plotting area numerical values unit of measurement can be changed.
About .............................Click to display the copyright and version information of the printer driver currently in use.
Restore Defaults ............Resets the settings to their original values.
* The minimum size of the media feed direction of the LCX603 main unit is 65 mm.
Even if a value lower than 65 mm is set, output will be 65 mm.
To Next Page
Loading...
