Groove 3RD WAVE - Saving a Program; Canceling Save

6 Saving a Program Groove Synthesis
Saving a Program
If you’ve created a sound that you like, you’ll probably want to save it.
Saving a program overwrites a previously saved program.
To save a program to the same preset location:
1. Press the write button. It begins blinking.
2. Press the write button again or press soft button 4 (ok). The program is
saved.
To save a program to a different location:
1. Press the write button. It begins blinking.
2. Turn soft knob 1 to select a different bank. Turn soft knob 2 to select a
different program location.
3. Press the write button again or press soft button 4. The program is
saved.
Saving a program saves any edits to programs on multi-parts 1-4.
PRESETS
COMPARE
WRITE
BANK PROGRAM
Presets section
Canceling Save
Sometimes you may want to cancel saving a program before you commit.
To cancel saving:
• If the write button is ashing, turn any parameter knob or press any
parameter button. The write LED stops ashing and saving is canceled.
You can return to editing.