.
de c l a r a t i o n o f Wa r n i n G S , ca U t i o n S , a n d no t e S
Throughout this manual, important and critical information is prefaced with the
word “Warning”, “Caution” and “Note”
Warnings are used when there is an extreme danger to the operator and/or to
the machine. Take all steps necessary to heed the warning given. Do not con-
tinue if you cannot follow the warning instructions. An example warning is:
WARNING! Never put hands between tool changer and spindle head.
Cautions are used when there is the potential for minor personal injury or me-
chanical damage, for example:
CAUTION! Power down the machine before performing any maintenance tasks.
Notes give additional information to the operator about a particular step or
procedure. This information should be taken into consideration by the operator
as the step is performed to ensure there is no confusion, for example:
NOTE: If machine is equipped with the optional extended Z-clearance
table, follow these guidelines:
To Next Page
Loading...
