USB / Hard Drive / Ethernet Device Manager
The Haas control incorporates a device manager which shows the available
memory devices on the machine in a tabbed menu.
Enter the Device Manager by pressing “List Prog”. Navigate the tabbed menu
using the arrow keys to select the appropriate device tab and press Enter.
When browsing a list of programs within a device tab, use the up/down arrow
keys to highlight programs and press Enter to add the highlighted program to
the selection.
Note: External USB hard drives only work when they are formatted as
FAT or FAT32. NTFS formatted devices will not work. To nd out what your
devices is formatted as; connect it to your PC, right click on the drive in
Windows Explorer and select Properties.
The following example shows the directory for the USB device. The selected
program in memory is shown with an “A”. The selected le will also show in the
active program display.
.
MEMORY FLOPPY HARD DRIVE USB DEVICE NET SHARE
CURRENT DIRECTORY: USB DEVICE\
(USB DEVICE)
A
: FILES IN SELECTION
: ACTIVE PROGRAM (O01254)
Use CURSOR keys to navigate listing
and CANCEL to go back to devices.
Press HELP for Help listing.
O11133 (WORK ORDER 7)
O12234
(WORK ORDER 11)
FITTING
PROJECT 2 <DIR>
3 PROGRAMS 88% FREE (889260 KB)
A
1153
784
10-29-07
11-12-07
11:13:25
08:20:00
Active Program
Highlighted Program
Subdirectory
File Size
Date and Time
ALL
Tabbed Menu Navigation
Cursor Arrows:
WRITE/ENTER:
CANCEL:
Navigate Tabs
Select aTab
Move Back OneTab Level
Active Tab
Program Selection
Cursor Arrows:
WRITE/ENTER:
SELECT PROG:
A
INSERT:
ALTER:
Move Selection cursor
AddProgram to Selection
(A CheckMark is Placed)
Makes theSelected
Program the Active Program (“ ”) or
SelectsProgram for FNC
Create NewFolderinCurrent
Directory (Type Folder Name, then Insert)
RenameFolder or Program
Help Mode
Press to Access the Pop-Up
Help Menu. Navigate UsingCursorArrow
Keys. Choose Options for Selected
Programs(Copy, Delete, Etc.)
HELP/CALC
Selected Program
Navigating Directories
To enter a sub-directory, scroll to the sub-directory and press Enter.
To leave a sub-directory, go to the top of the sub-directory or press Cancel.
Create Directories
Create a new folder by entering a name and pressing “Insert”.
To create a new Sub-directory, go to the directory where the new sub-directory
will be located, enter a name and press “Insert”. Sub-directories are displayed
with their name followed by <DIR>”.
To Next Page
Loading...
