Hammer A2-26 User Manual

10
Safety instructions
2.4 Requirements of the personnel
● Only authorised and trained personnel may work on and with the machine.
"Qualified personnel" is a term that refers to those who – due to their
professional training, know-how, experience, and knowledge of relevant reg-
ulations – are in a position to assess delegated tasks and recognise potential
risks.
● Personnel must be briefed about all functions and potential dangers of the
mac
hine.
● If the personnel lack the necessary knowledge for working on or with the
mac
hine, they must be trained. Responsibility for working with the machine
(installation, service, maintenance, overhaul) must be clearly defined and
strictly observed.
● Only those people who can be expected to carry out their work reliably may
be gi
ven permission to work on or with the machine.
● Personnel must refrain from working in ways that could harm others, the
en
vironment or the machine itself.
● It is absolutely forbidden for anyone who is under the influence of drugs,
alc
ohol or reaction-impairing medication to work on or with the machine.
● When appointing personnel to work on the machine, it is necessary to
ob
serve all local regulations regarding age and professional status.
● The machine may only be operated by an adult, that is without mental
limit
ations or under the supervision of such a person.
● All operators must ensure that unauthorised persons are kept at a safe dis-
t
ance from the machine.
● Personnel are obliged to immediately report any irregularities with the
mac
hine that might compromise safety to the operator.
2.5 Work safety
● Following the safety advice and instructions given in this manual can prevent
bodil
y injury and material damage while working on and with the machine.
● Failure to observe these instructions can lead to bodily injury and damage to
or de
struction of the machine.
● Disregard of the safety advice and instructions given in this manual as well
a
s the accident prevention regulations and general safety regulations appli-
cable to the operative range of the machine shall release the manufacturer
and their authorised representatives from any liability and from any compen-
sation claims.
2.6 Personal protective equipment
2.6.1 Prohibitions
When working on or with the machine, the following must be strictly observed:
Please note
Long, loose hair is forbidden.
W
ith long hair and beards a hair net must be worn.

Hammer A2-26 Specifications

General

Brand	Hammer
Model	A2-26
Category	Planer
Language	English