Hammer A2-26 User Manual

22
Technical information
Cutterblock
Data Value Unit
Blade trajectory diameter 72 mm
Number of knives as standard 3 Qty
Rot. speed 50 Hz 5000 min
-1
Rot. speed 60 Hz 5000 min
-1
Planer
Data Value Unit
Length infeed planing table 507 mm
Length outfeed planing table 507 mm
Length total planing table 1045 mm
Surface planing width 260 mm
Planing fence - tilt range 0 - 45 °
Fence plate (length x height) 700 x 130 mm
Maximum depth of cut 3.0 mm
Thicknesser
Data Value Unit
Thicknesser table length 497 mm
Thicknesser width 254 mm
Thicknessing height min.–max. 3 - 184 mm
Feed speed 50 Hz 4.5 m/min
Feed speed 60 Hz 4.5 m/min
Maximum depth of cut 3.0 mm
4.6 Dust extraction
Data Value Unit
Extraction connection diameter 100 mm
Min. air speed 20 m/s
Negative pressure planing min. 740 Pa
Negative pressure thicknessing min. 850 Pa

Hammer A2-26 Specifications

General

Brand	Hammer
Model	A2-26
Category	Planer
Language	English