● Placing objects or tools on the work surface.
● Use of tools or materials which are not intended for processing on the
mac
hine.
● Inserting tools that are either not allowed, or not authorised in the machine.
● Using modified tools.
● Using spare parts, accessories and equipment that have not been approved
b
y the manufacturer.
● To change or modify the machine.
● To adapt, remove or bridge the safety equipment.
● Intentionally trigger safety equipment.
● Climb on the machine.
Misuse dur
ing operation:
● Operating the machine carelessly.
● Operating the machine without using the appropriate safety equipment.
Chec
k the correct functioning of the safety equipment regularly.
● Processing of overly large or heavy workpieces.
● Processing very small workpieces without assistance.
○ Keep accessories at hand.
● Processing of unsuitable materials such as steel.
● Processing workpieces that are not fixed or insufficiently fixed.
● Processing of workpieces in the same direction as the rotation of the tool.
F
eed direction corresponds to the direction of movement of the cutting edge
in the area of contact.
Maintenance misapplication:
● Service work carried out by untrained or unauthorised personnel.
● Non-observance of the maintenance guidelines.
○ To ensure quick and unmistakable communication, visual contact with the
oper
ators must be kept at all times.
○ Operators should repeat and confirm instructions before they are carried
out
.
○ Wait for all the moving parts to come to a standstill.
○ Following the maintenance work, reinstall the safety equipment and
c
heck that they are functioning properly.
○ Only start the machine when there is no one within the safety zone.
○ Maintenance technicians need to be fully aware of how the machine
oper
ates and moves, and they must be familiar with the exact operating
sequence.
○ Keep a record of all maintenance work.
● Non-observance of usage and damage tracks.
● Whilst maintenance work is being carried out, secure the area around the
mac
hine.
○ Whilst maintenance work is being carried out, put up a sign that states
"Mac
hine under maintenance".
To Next Page
Loading...
Need help?
General
