*#1
Sk1
/
Sk2
Owner’s Manual
120
SETUP PROCEDURES
Save or Load the SET-UPS to/from the USB fl ash drive in the SETUP mode.
To locate this mode:
HOW TO READ THE DISPLAY
SAVE THE SETUP
Check that the USB fl ash drive is correctly inserted.
Locate the SETUP mode.
WHAT DOES THIS MEAN?
USB is not ready.
USB fl ash drive is not correctly inserted.
Select the “New File” by pressing the [S] button (or turning
the [VALUE] knob) a few times.
If you want to save the sound library, too, press the [X] button
to display the “TYPE” and change the value from “SETUP” to
“WHOLE” with the [VALUE] knob. en press the [W] but-
ton and return to the fi le display mode.
If you press the [ENTER] button, it is saved. With the
WHOLE fi le, it can take up to 3 hours maximum for saving.
A temporary name “SETUPxx” is automatically given to the
saved setup fi le.
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
MENU/
EXIT
ENTER
SETUP name
This indicates there is another
SETUP le above (or below).
Type of File
SU: only the Setup
WH: includes Library
What your are going to operate
This indicates there is another
page on the right (or on the left).
1
2
3
4
5
6
To Next Page
Loading...
Need help?
General
