EasyManuals Logo

Hammond SK2 User Manual

Hammond SK2
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
*#1
Sk1
/
Sk2
Owners Manual
136
TROUBLESHOOTING
Malfunction of the buttons, the keys, etc.
Turn off the POWER switch once, then turn it on again. If this procedure is not suc-
cessful, turn off the POWER switch. While pressing the [RECORD] button, turn the
POWER switch on again. (Note that in this case, all parameters all parameters return
to their factory-preset status.)
No sound is produced when the keys are pressed.
e MASTER VOLUME is at the minimum setting.>
Adjust the volume with the MASTER VOLUME control.
e local control is turned OFF.>
Turn the local control ON, if not using an external sequencer or computer. (P. 114 #3)
Leslie speaker is connected.>
Line out and Phones jack does not output the sound of rotary channel when the Leslie
speaker is connected.
Cannot hear the some notes.
Hooked-up with mono.>
Set the audio mode at “MONO”. (P. 104 #1)
The Manual Bass does not sound when the Split is turned o .
e Manual Bass - Mode is set at “CHRD” (detecting chord on the LOWER part).>
Set the mode at “LOW” or “POLY”. (P. 112 #1)
The expression does not change.
e Expression Source assignment is not correctly set.>
Correctly set the Expression Source item in the CONTROL mode. (P. 128)
e Expression mode of Overdrive is set at “OD Only” or “Input”.>
Set the Expression mode at except “OD Only” or “Input”. (P. 92)
e Source of Multi-Eff ect is set at “EXP”.>
Set the Source at except “EXP”. (P. 92)
The Foot switch does not work properly.
e Foot Switch assignment is not correctly set. >
Correctly set the Foot Switch in the CONTROL mode. (P. 78)
No functions the Split or Manual Bass.
MIDI IN mode is set at “LOWER”, “LOW+PED”, “UPPER” or “UPP+PED”. >
Set the MIDI IN mode depending on the purpose. (P. 114 #2)
The Manual Bass Does not sound.
e Foot Switch assignment is set at “MANUAL BASS”. >
Press the Foot Switch or set the Foot Switch assignment at except “MANUAL BASS”.
(P. 78)
When the patch is called, the sound is interrupted.
If the following values are diff erent between the patches, there will be a brief interrup-
tion:
Organ type
Extra Voice
Multi-Eff ects
Octave
Split
Manual Bass
Key Range
The MENU/EXIT or RECORD does not work.
e Display Lock is enabled. >
Disable the Display Lock (P. 36).

Table of Contents

Other manuals for Hammond SK2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hammond SK2 and is the answer not in the manual?

Hammond SK2 Specifications

General IconGeneral
BrandHammond
ModelSK2
CategoryMusical Instrument
LanguageEnglish

Related product manuals