EasyManuals Logo

Hammond SK2 User Manual

Hammond SK2
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
*#1
Sk1
/
Sk2
Owners Manual
30
ADD EFFECTS TO THE ORGAN SECTION
VIBRATO & CHORUS
Adding the Classic Hammond Vibrato & Chorus to the sound.
[UPPER], [LOWER] buttons
Switches the Vibrato & Chorus eff ect ON/OFF. When ON the light illuminates.
[V1/C2], [V2/C2] buttons
ese set the depth of the Vibrato eff ect. If both buttons are selected, the depth be-
comes maximum as V3/C3.
[CHORUS] button
is button changes the Vibrato to the distinctive and Classic Hammond Chorus
eff ect-Changing the V1/V2/V3 to C1/C2/C3. When the Chorus eff ect is engaged
the button light illuminates.
NOTE: You can  ne-tune the speed of Vibrato/Chorus. (P. 83)
For this example, set ALL of the Vibrato & Chorus buttons to “on” (except [LOW-
ER]).
LESLIE
e LESLIE eff ect is the famous “Moving and Swirling” sound provided by rotating
horns and speakers, but executed here in the Digital realm.
[FAST] button
is button toggles the mode of the rotor to fast or not. When the light is ON, it is
FAST, and when OFF, not.
[STOP] button
is button sets the mode when the [FAST] button is off . When the light is ON, it is
STOP, and when OFF, it is SLOW.
[BYPASS] button
To Engage the Leslie eff ect, press the [BYPASS] button turning the light OFF.
NOTE: These controls perform the same functions when a Physical Leslie is connected via the
8 pin plug.
NOTE: You can  ne-tune the parameters of the Digital Leslie e ect etc. (P. 84)
For this example, let’s set the status of all lights OFF.
OVERDRIVE
e overdrive section adds warmth at low settings, and “grit” or distortion at higher.
[ON] button
Toggles the Overdrive OFF and ON (when on the light is illuminated).
[AMOUNT] knob
Adjusts the amount of Overdrive.  e amount increases as you rotate the knob clock-
wise.
In this example, the Overdrive is not used.  e Button light should be OFF.
MULTI-EFFECTS
Adjusts the amount of the Chosen Multi-eff ect to be applied to the Drawbar sounds.
e default settings: at “Tremolo”.
[ON] button
Toggles the Multi-Eff ects send ON and OFF ( e light illuminates when ON).
[AMOUNT] knob
Adjusts the amount of Multi-Eff ect to be applied.  e amount increases as you rotate
the knob clockwise.
In this example, the Multi-Eff ects are not used.  e Button light should be OFF.
TRY CREATING YOUR OWN SOUND - continued
ORGAN TYPE
ORGAN
TYPE

Table of Contents

Other manuals for Hammond SK2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hammond SK2 and is the answer not in the manual?

Hammond SK2 Specifications

General IconGeneral
BrandHammond
ModelSK2
CategoryMusical Instrument
LanguageEnglish

Related product manuals