Hammond SK2 - Loading Patch Files from USB; Deleting Patch Files from USB

*#1
Sk1
/
Sk2
Owner’s Manual
124
LOAD THE PATCH FILE
Locate the Patch mode with refer to upper fi gure on last page.
Select the Patch fi le to load with the [S],[T] buttons or the
[VALUE] knob, and press [ENTER].
 If you do this operation, a patch in this keyboard are
replaced with the newly loaded patch. You should
save important data beforehand (p. 123).
Check the USB fl ash drive is correctly inserted.
Select the Patch number to be replaced.
Press the [ENTER] button.  e Patch is loaded.
DELETE THE PATCH FILE
Check the USB fl ash drive is correctly inserted.
Select the Patch fi le to delete with the [S],[T] buttons or the
[VALUE] knob.
Press [W] button once. “[ENT] to Delete” is displayed.
Press the [ENTER] button. “Delete?” is displayed. Now press
the [ENTER] button again.  e Patch is deleted.
NOTE: If you do not with to delete the setup, touch the [MENU/EXIT]
button.
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
To locate the PATCH mode, please refer to the illustration or
top of page 123.
1
2
3
4
1
2
3
4
5