31
Getting Ready To Play
ALLOCATING THE EXTRA VOICES
Choose which parts will play the Extra Voices.
[UPPER] button
e Extra Voices play in the UPPER part.
[LOWER] button
e Extra Voices play in the LOWER part.
[SOLO] BUTTON
Turns the Organ section OFF and only the Extra Voices sound.
In this example, a blend of Organ and Piano voices are desired.
Press the [UPPER] button ON, and insure the [LOWER] and
[SOLO] buttons are not lit.
SELECT AN INSTRUMENT
To choose the Extra Voice instruments, press the desired Voice
Group button on the top panel, then select your specifi c instru-
ment in the display.
Select the “EPiano Rd2” as follows.
1. SELECT A VOICE GROUP
Press the [E.PIANO] button.
e instrument automatically selects voice used previously in
this voice group.
e voice will appear in the display.
2. SELECT AN INSTRUMENT
Select “EPiano Rd2” with the [VALUE] knob.
Now the “EPiano Rd2” is ready to play.
e voice group “A. Piano 2” is hidden behind the [A.PIANO]
button. To select this;
1. Press the [A.PIANO] button.
2. Locate the cursor at voice group with the [W] button.
3. Select the “A.Piano2” with the [VALUE] knob.
4. Locate the cursor at instrument with the [X] button.
or, Press the [A.PIANO] button again after step 1.
ADJUST THE VOLUME BALANCE
To achieve your desired blend of Organ and Extra Voice (In
this example the E. Piano), adjust the Extra Voice volume knob
accordingly.
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
Column: To select the “A. Piano 2”
UPPER
PEDAL
LOWER
NUMBER NAME
PATC H
ENTER
VA L U E
1
2
1
2
3
To Next Page
Loading...
Need help?
General
