*#1
Sk1
/
Sk2
Owner’s Manual
62
RECORD TO THE PATCH
Example: RECORD TO “U032”
2
PRESS THE [RECORD] BUTTON
Press the [RECORD] button. e Record mode is displayed.
3
SELECT THE PATCH NUMBER
Press the [ENTER] button. e patch is confi rmed and is dis-
played as follows for a few seconds:
Recording Patch...
When the recording is completed, the display returns to the
previous one.
NOTE: The recorded patch data is retained if the power is switched
o or disconnected.
1
GIVE THE NAME
Enter the name of your Patch. (P. 61)
Select the patch number you wish to record with the [VALUE]
knob ( is time select U032).
4
PRESS [ENTER]
PATCH - continued
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
VA L U E
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
To Next Page
Loading...
Need help?
General
