Hammond SK2 - Recording Custom Virtual Tone-Wheels

89
Setting the Parameters
1
2
3
4
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
VA
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
Record the CUSTOM virtual TONEWHEELS
 e Tonewheel Parameters (= 3 - 8 of the previous paragraph) are for determining the Cus-
tom Number for recording.  e Custom Number is selected and used, when you play.
Enter the Custom Name if desired.
Touch the [RECORD] button in the setting mode of the Tone-
wheel Parameters.
 e mode for selecting the Custom Number to be recorded will
be displayed.
Select the Custom Number to be recorded using the [VALUE]
knob.
It will be recorded if you touch [ENTER] button.
 e display will be as illustrated, while the recording is being writ-
ten to memory.
NOTE: If you do not want to record it, just touch the [MENU] button.