81
Setting the Parameters
DISPLAY
DISPLAY - SHORTCUT (G)
Sets the shortcut waiting time.
e setting range is 0 to 2 seconds. At NO the shortcut feature is disabled.
DISPLAY - TIME OUT (G)
Sets the time for returning to the previous mode from the mode displayed by the short-
cut operation.
e setting range is 4 to 16 seconds. At NO the screen will not return to the previous
mode.
DISPLAY - POP UP (G)
Sets the interval at which the Pop Up is displayed when you move the [OVERDRIVE]
or [EFFECT AMOUNT] knob.
e setting range is 0.5 to 2 seconds. At NO no Pop Up is displayed.
KEYBOARD
VELOCITY OFFSET (S)
Fine-adjusts the keyboard velocity to personal taste. the setting range is -32 to +32. If
your touch is heavy, set this parameter to a negative value, if your touch is light, set the
parameter to a positive value.
SOUNDING POINT (S)
Set the sounding point if the internal keyboard is played.
DEEP All the section sounds on the deep point in the stroke.
AUTO The Organ section sounds on the shallow point if the [ALLOCATE] of the Extra Voice section is
OFF.
NOTE: The External Zone notes on at shallow point, and the velocity value is xed at 100 when
the Sounding Point is set at AUTO, and the [ALLOCATE] is OFF.
NOTE: The parameter with (P) indicated is
a patch parameter, and is recorded
to each patch. (G) indicates “global
parameter”, (S) indicates “system
parameter”, which is recorded upon
being set, and is common with each
patch.
To Next Page
Loading...
Need help?
General
