Hammond SK2 User Manual

71
Using the Control Panel
5
MOVE THE CURSOR TO THE PARAMETER YOU WANT TO CHANGE
Decay time is on the “DECAY” page.
Locate the “DECAY” page using the
[S][T] buttons.
“FAST” is on the right side of the page
move the cursor (blinking value) to the
right using the [W][X] buttons.
6
CHANGE THE VALUE
Decrease the value using the [VALUE]
knob.
NOTE: If you want to change other items,
repeat the process 1 to 6.
8
RECORD TO THE PATCH IF NECESSARY
 e parameter “DECAY FAST” is a patch parameter, so, if you call another (or
same) patch, it is changed to the newly set value.
If you need the changed value hereafter, you must record it to a patch.
PATCH PARAMETERS
Patch Parameters are unique to the current
patch, and change with the programming of
each patch. Many of the knobs/buttons on the
top panel are “Patch Parameters”
The Parameters common to all the patches
are called “Global Parameter”, on the contrary.
7
RETURN TO THE PLAY MODE
Press the [PLAY] button.  e display
returns to the PLAY mode.
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PAT CH
ENTER
VA L U E
MENU/
EXIT
PLAY

Hammond SK2 Specifications

General

Brand	Hammond
Model	SK2
Category	Musical Instrument
Language	English