101Special Utility Features
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
`1 MEMORY DUMP1
ALL DATA OUT
`4 PRESET COPY
CAN to CAN
`4 PRESET COPY
press VALUE(~)
Preset Copy
This Advanced Feature allows you to copy the entire contents of one Preset number to another Preset number. This is
useful if you have two or more registrations you want to use with many parameter settings in common.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button three times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button three times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use the PAGE "<" and the PAGE "=" Select Touch Button to move back and forth between the source Preset - the
Preset you want to copy from - and your destination Preset - the Preset you want to copy to. The source Preset is listed
on the left, and the destination Preset is listed on the right.
Use the VALUE ">" Select Touch Button to scroll up through the Preset numbers.
Use the VALUE "?" Select Touch Button to scroll down through the Preset numbers.
5. After you have made your selections, touch the PAGE "<" Select Touch Button. The Information Center
Display should look like this:
6. Touch the VALUE ">" Select Touch Button. When the Information Center Display flashes, “Data
completed!”, the Preset Copy process is complete.