Hammond XK-2 - Receive Breath Controller Data on; off

70 MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{26 MIDI17
Rx BREATH OFF
MIDI Receive Breath Controller Data ON / OFF
Your Hammond XK-2 can receive Breath Control (Controller #2). This is so that the XK-2 can be played using a MIDI
wind controller. This Advanced Feature allows you to select whether you want the XK-2 to receive Breath Control. The
default setting is “OFF.”
NOTE: The XK-2 treats incoming Breath Control data as Volume data.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button sixteen times. The Information Center Display should look
like this:
4. Now select the option you wish by doing the following:
Use either the VALUE ">" or the VALUE "?" Select Touch Button to turn this feature "ON" or "OFF.”
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.