61MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{17 MIDI8
FOOT SW CTR# 64
MIDI Foot Switch Controller Number
This Advanced Feature allows you to select the Controller number for the Foot Switch. The default setting is “64"
(Damper).
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button seven times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use the VALUE ">" Select Touch Button to scroll up through the numbers.
Use the VALUE "?" Select Touch Button to scroll down through the numbers.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
