78 MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}43 ZONE1-1
CHANNEL OFF
}45 ZONE1-3
BANK# MSB 0
Ë External Zone Program Bank
This Advanced Feature allows you to select different Bank numbers for voices. You can select the “MSB” (Most Significant
Bit) and the “LSB” (Least Significant Bit) for each Bank selection. This is so that you have access to the great number of
voices available on modern GS-compatible sound modules. Please refer to the documentation for your module to determine
the Bank numbers for specific voices.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the INT.CONT./EXT.ZONE Select Touch Button two times. The Information Center Display
should look like this:
3. Touch the PAGE ”<” Select Touch Button two times.
The Information Center Display should look like this:
4. Now select the option you wish by doing the following:
Use the INT.CONT./EXT ZONE Select Touch Button to select EXT. ZONE 1 or EXT. ZONE 2.
NOTE: When you touch the INT.CONT./EXT.ZONE Select Touch Button repeatedly, you are actually toggling
between the INT.CON T. and EXT.ZONE Menus. As a result, you will also see the SPLIT Menu display along with
EXT.ZONE 1 and EXT.ZONE 2.
Use the PAGE “>” and the PAGE “?” Select Touch Buttons to select “MSB” or “LSB.”
Use the VALUE ">" Select Touch Button to scroll up through the choices.
Use the VALUE "?" Select Touch Button to scroll down through the choices.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
Need help?
General
