Hammond XK-2 - Modulation

85MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}43 ZONE1-1
CHANNEL OFF
}54 ZONE1-12
MODULATION ON
Ë External Zone Modulation
This Advanced Feature allows you to select whether you want to send Modulation Data from the External Zones.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the INT.CONT./EXT.ZONE Select Touch Button two times. The Information Center Display
should look like this:
3. Touch the PAGE ”<” Select Touch Button eleven
times. The Information Center Display should look like this:
4. Now select the option you wish by doing the following:
Use either the VALUE ">" or the VALUE "?" Select Touch Button to turn this function "ON" or "OFF.”
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.