33Manual Split
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}34 SPLIT1
SPLIT POINT 2B
}36 LM OCTAVE
OCTAVE UP 0
Ë Lower Manual Octave
This Advanced Feature allows you to select the Octave range in which the Lower Manual will play. This is so that you can
play chords or chordal accompaniment to your right hand melody in the correct octave range.
NOTE: The Split Touch Button must be “ON” (red LED lit) in order to hear the effect of this feature.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the INT.CONT/EXT.ZONE Select Touch Button once. The Information Center Display should
look like this:
3. Touch the PAGE "<" Select Touch Button two times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use the VALUE ">" Select Touch Button to move the Lower Manual Octave up. The upper limit is “2” (the notes
sound one, or two, two octaves higher than written).
Use the VALUE "?" Select Touch Button to move the Lower Manual Octave down. The lower limit is “0” (the notes
sound as written, or at “concert” pitch).
This data CAN be stored to a Preset. To see a total listing of all Preset Parameters, see the Preset Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
