59MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{15 MIDI6
LOCAL ON
MIDI Local Control
This Advanced Feature allows you to turn Local Control "ON" or "OFF.” When Local Control is "ON,” the XK-2 will
play both its internal sounds and the sounds from a connected MIDI device. When Local Control is "OFF,” the XK-2 will
play only the sounds from a connected MIDI device and the XK-2's internal sounds are silenced.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button five times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use either the VALUE ">" or the VALUE "?" Select Touch Button to turn Local Control "ON" or "OFF.”
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
