Hammond XK-2 - Percussion Response Features; Touch Response and Velocity Sensitivity

25Advanced Features - Percussion
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}18 PERC. PARAM1
DECAY S_SPD. 8
}22 PERC. PARAM5
TOUCH ON
Ë Percussion Touch
This Advanced Feature allows you to turn "ON" or "OFF" the Percussion Touch-Response. When “ON,” this feature
replicates the Touch-Response Percussion function on the original models B-3, C-3, RT-3 or A-100. When "ON,”
remember that Touch-Response Percussion tones will sound only if you play the keys in a detached manner (non-legato).
Any degree of detachment is sufficient. The “OFF” mode replicates the “legato” Percussion function on the H-100, X-66,
Concorde and later model Hammond Organs. Each key will sound when played regardless of whether other keys are being
held. The default setting is “ON.”
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the PERC./ANIMATION Select Touch Button once. The Information Center Display should
look like this:
3. Touch the PAGE “<” Select Touch Button four times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use either the VALUE ">" or the VALUE "?" Select Touch Button to turn Percussion Touch "ON" or "OFF.”
This data CAN be stored to a Preset. To see a total listing of all Preset Parameters, see the Preset Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.