43Effects
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
~#1-1 SLOW SPED1
HORN ROTR 36rpm
~#1-11 ROTR VOL1
HORN ROTR 0dB
Ë Leslie Volume Balance
This Advanced Feature allows you to adjust the balance between the Horn and Bass Rotors of the digital Leslie. You can
select from 0db through -12db for both Horn and Bass Rotors.
NOTE: A “decibel” is a unit of measurement for the loudness of sound waves, and is usually abbreviated, “db.”
NOTE: This Advanced Feature DOES NOT affect a connected external Leslie Speaker cabinet.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the LESLIE Select Touch Button once. The Information Center Display should look like this:
3. Touch the PAGE “<” Select Touch Button ten times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use either the PAGE "<" or the PAGE "=" Select Touch Button to select between Horn and Bass Rotors.
Use the VALUE ">" Select Touch Button to increase the number setting.
Use the VALUE "?" Select Touch Button to decrease the number setting.
This data can be included as part of a Leslie Preset, then the Leslie Preset can be stored to a Preset. To see a total listing of all Leslie
Parameters, see the Leslie Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
