Hammond XK-2 User Manual

67MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{23 MIDI14
CTR. CHANGE ON
MIDI Control Change
This Advanced Feature allows you to turn the MIDI Control Change Gate "ON" or "OFF.” When this switch is "ON,”
incoming Control changes made during performance, such as Volume, Modulation, Expression, etc., are recognized by the
XK-2. When this switch is "OFF,” the XK-2 ignores all incoming Control change messages other than Drawbar changes.
(See the previous page for information about MIDI Drawbar Change. See the MIDI Controller List for a complete listing of
Controllers.) The default setting is “ON.”
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button thirteen times. The Information Center Display should look
like this:
4. Now select the option you wish by doing the following:
Use either the VALUE ">" or the VALUE "?" Select Touch Button to turn Control Change "ON" or "OFF.”
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.

Hammond XK-2 Specifications

General

Brand	Hammond
Model	XK-2
Category	Electronic Keyboard
Language	English