Hammond XK-2 - Preset Bank Management and Recording

49Effects
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}27 VIBRATO
SPEED NORMAL
}31 OVERDRIVE
LEVEL 0
Ë Overdrive Level
This Advanced Feature allows you to set the numeric level of the Overdrive. You can select from “0" to “15.”
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the PERC./ANIMATION Select Touch Button two times. The Information Center Display
should look like this:
3. Touch the PAGE “<” Select Touch Button four times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use the OVERDRIVE Rotary Control to make your numeric setting, or:
Use the VALUE ">" Select Touch Button to scroll up through the numbers.
Use the VALUE "?" Select Touch Button to scroll down through the numbers.
This data CAN be stored to a Preset. To see a total listing of all Preset Parameters, see the Preset Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.