Hammond XK-2 - Receive after Touch Data on; off

71MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{27 MIDI18
Rx AFT OFF
MIDI Receive After Touch Data ON / OFF
This Advanced Feature allows you to select whether you want the XK-2 to receive After Touch data, and how you want the
XK-2 to respond to After Touch data. You may select “OFF,” Leslie Slow/Fast control, Overdrive or Pitch Bend. The
default setting is “OFF.”
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button seventeen times. The Information Center Display should look
like this:
4. Now select the option you wish by doing the following:
Use the VALUE ">" Select Touch Button to scroll up through the options.
Use the VALUE "?" Select Touch Button to scroll down through the options.
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.