60 MIDI
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
{10 MIDI1
UM CHANNEL 1
{16 MIDI7
NRPN ON
MIDI NRPN
This Advanced Feature allows you to turn "ON" or "OFF" NRPN. "NRPN,” or Non-Registered Parameter Number, is an
expanded control change message, each function of which is implemented differently by different manufacturers. The
Hammond XK-2 uses NRPN to allow you to control such parameters as Percussion 2nd and 3rd Harmonic ON/OFF,
Vibrato or Chorus ON/OFF, Leslie ON/OFF and Leslie Slow/Fast.
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the SYSTEM Select Touch Button two times. The Information Center Display should look like
this:
3. Touch the PAGE “<” Select Touch Button six times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use either the VALUE ">" or the VALUE "?" Select Touch Button to turn NRPN "ON" or "OFF.”
This is a System Parameter, and this data CAN NOT be stored to a Preset. To see a total listing of all System Parameters, see the System
Parameter List.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
