91Special Advanced Features
Hammond XK-2 Quick Features Guide
Select
EDIT PARAMETER
}34 SPLIT1
SPLIT POINT 2B
}40 MOD. MODE
OFF
Modulation Mode
This Advanced Feature allows you to assign the internal function of the XK-2 that the Modulation Wheel will control. You
can select “OFF,” “LES S/F” (the LESLIE FAST Touch Button will turn “ON” or “OFF”) or “OVERDRIVE”. The
default setting is "OFF.”
TRY THIS:
1. Touch the EDIT Select Touch Button. The red LED will light, and the Information Center Display
should look like this:
2. Touch the INT.CONT./EXT.ZONE Select Touch Button once. The Information Center Display should
look like this:
3. Touch the PAGE ”<” Select Touch Button six times. The Information Center Display should look like
this:
4. Now select the option you wish by doing the following:
Use the VALUE ">" Select Touch Button to scroll up through the choices.
Use the VALUE "?" Select Touch Button to scroll down through the choices.
NOTE: You can exit by touching the EDIT Select Touch Button.
To Next Page
Loading...
