-D2 -112
17-6
QUEUE
1. According to step 1-8 of "Alter", select
patterns.
2. Select .
3. Select registration No. and press .
When pattern data is not displayed on the left
side on the screen, no pattern data is registered
in the holder of the setting No.
Registration is deleted.
4. Press .
QUEUE setting is registered as setting No.2.
19_5 NB01
Registration of QUEUE setting
Up to 10 QUEUE settings can be registered.
Once you register QUEUE you can select registered QUEUE setting anytime.
In case you delete pattern from machine memory, QUEUE setting which has deleted pattern
will be deleted too. (Erasing patterns from memory
5-B)
Press to return to Menu mode.
Press
to return to Drive mode.
To Next Page
